FC-R10M long range card reader has a built-in 2.4G long range card reader, the recognition distance can be adjusted from 0-50 meters, the reading frequency (speed) and the reading distance can be set according to needs, and it supports reading legal cards to open the door .
Card Reader Parameters:
Working Voltage: 14.8VDC (9-14.8VDC)
Working Current: < 500mA
Working Temperature: -40℃～+85℃
Working Humidity: 10%～90%RH
Reading Distance: max 90 meters
Operaition Frequency: 72MHz
Reading Capacity: 1000 tags/s
Storage Temperature: -60℃～+85℃
Issue Card and Delete Card: not supported
Card Type: 2.4G card
Electric Lock: not supported
Wiegand Output: Wiegand26/34
Buffer Capacity: 1000 tags (anti-reread)
Communication Interface: Wiegand26bit, 34bit, RS485
Processor: 32-bit ARM Cortex-M3 core microcontroller
Attenuation Distance: 0-90 meters adjustable (distance error ±15%)
Device Size: 87×87×23mm
Antenna Parameters:
Frequency Range: 2.400-2.480GHz
Gain: 5dBi
Power Angle: 60°/120°/360° (optional)
Polarization Method: circular polarization
Input Impedance: 50Ω
Shell: glue-filled and waterproof
The FC-R10 long range card reader need to used with the access control board. FC-R10M long range card reader has a built-in 2.4G long range card reader, the recognition distance can be adjusted from 0-50 meters, the reading frequency (speed) and the reading distance can be set according to needs, and it supports reading legal cards to open the door .
Main Features of the Product:
Using high-performance of 32-bit ARM Cortex-M3 core microcontroller
Label recognition speed: 2000 labels/sec
Tag reading capacity: 1000 tags/sec
Label buffer capacity: 1000 labels
Using 5dBi built-in antenna
Maximum reading distance of 90 meters
Three power angles are optional (60°, 120°, 360°)
The reading distance can be adjusted from 0 to 90 meters
Eight Characteristics:
1. Directionality: 2.4G card reader can realize directional recognition and non-directional recognition.
2. Security: Using sophisticated algorithms and imported chips to ensure data security and prevent cracking.
3. Strong anti-interference: 2.4G card reader has strong anti-interference and low requirements for various interference sources on site.
4. Transmissibility: Both low frequency and high frequency are open microwave frequency bands in the world, no need to apply and pay.
5. Lower cost: Compared with other UHF readers, our 2.4G card reader has a lower cost.
6. High recognition speed: The highest recognition speed of 2.4G card reader can reach 2000 tags/sec (send in time-sharing order).
7. Ultra-reading capability: 2.4G card reader can read up to 1000 tags/sec (anti-re-reading).
8. Stable and reliable: 2.4G card reader protection grade IP67 stability is very good.
Size:
Indicator：
Power Supply：Red Light
Heartbeat light：Blue Light
Reading Card：yellow light
Wiring instructions:
FC-R10 provides WIEGAND26 format output, and provides LED and BEEP control circuits.
Wiring Diagram:
